If you’re looking for information on Waterproofing Basement Walls, this has it all.
Waterproofing basement walls should be a standard thing to do when finishing a basement. Moisture entering through the walls of the basement is the main reason that area of your house is more damp than the rest of the house. The most frequent causes of water build-up in basements are due to cracks, leaking windows and pipe condensation. A great deal of problems can be created from too much water or long term water retention in the basement.
Basement Wall Options
There are numerous ways of waterproofing basement walls and these include:
- French Drains
- Hollow Baseboard Molding
- Sump Pumps
- Waterproofing
- Damp Proofing
French Drains
Interior drainage systems installed below the wet basement floor to collect underground water and wet wall seepage.
Whilst the basement floor is still wet, dig a trench around its inside perimeter. First you need to position a plastic drain pipe, ready perforated, and then make sure that it is surrounded by gravel or similar Some wet basement waterproofing and repair contractors re-cement the floor over the French drain system leaving a 1 inch to 2 inch gap in the floor along the walls to allow the web wall seepage to drain below the floor into the French drain system. A drain that connects to a sump pump is usually the French type.
Hollow Baseboard Molding and Cove Systems
System for installing a hollow baseboard channel use a waterprof-of epoxy for the bonding to the floor and joint. This empty molding will gather wet wall seepage as well as fluid which rises at the cove region. More often than not, linked to a sump pump.
Sump Pumps
Installed in a plastic or fiberglass tank below the wet basement floor. Sump pumps can collect underground water through perforations in the sump well in the immediate vicinity of the sump pump. A good way of draining excess water from a basement floor or from any underground drainage pipes that you might have is to utilise a sump pump.
Wall Sealers
Varieties include spray applied basement wall sealers, brush or roller applied basement waterproofing sealers, or panel type basement waterproofing sealers for wet basement walls.
The fact is that even with a good drainage system there is no surety of the basement walls remaining dry. We need to evaluate the most economical method to stop moisture from getting in the basement walls and this may be damp proofing and waterproofing.
What is Damp Proofing?
The majority of waterproofing products are comprised of a tar based substance in a solvent base. They are cheap to apply but their effectiveness is limited because they are only to designed to ‘retard’ moisture penetration, not prevent it. The biggest problem is that, because this material becomes brittle, hairline cracks will appear as the foundation settles. Since the tar based coating does not stretch to cover these cracks, water will seep into the basement.
Does waterproofing may help a lot in protecting basement walls?
The water proofing products are such that they stop water penetrate into wet places as well. Because hydrstatic pressure in the soil after heavy rain or spring starts thawing. The rubber used in Advanced Water Proofing Technologies products provides superior waterproofing protection and allows the product to remain flexible even after drying. The concrete or block has a waterproof coating that stretches to make the foundation completely waterproof.
Application instructions:
There is not much price difference between waterproofing and damp proofing which show that waterproofing as the right alternative considering that oftentimes it goes with a 25 to 30-year guarantee
Builders, many times in the past, paid little attention to waterproofing basement walls. So now you can fix that with a product anyone can use. Even if you are not a professional you will find that our products are easily applied and not harmful. These are available in 5 gallon pails or 55 gallon drums, as an example, and are ready for use without heat or any specialized equipment – if you can use a brush or a roller, you can use these. Commercial airless sprayers can be rented by the day to waterproof basement walls. In 2 or 3 hours, a couple people using rollers can waterproof an average-size basement (about 1,000 square feet) without difficulty. So start it and enjoy the convenience of damp-less space.
This entry was posted on Thursday, February 25th, 2010 at 5:04 am and is filed under General. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.